500 LPH RO Plant

DESIGN BASIS

Raw Water Pumping Rate : 1.2m³ / hr
RO Treated Water : 0.500 m³ / hr
RO Reject : 0.500 m³ / hr
Recovery Ratio : 50 %
Reject Ratio : 50 %

PROCESS DESCRIPTION

1. MICRONFILTRATION:
Cartridge filter is provided to remove suspended matter and guard against the entry of foreign material into the final treatment.
2. HIGH PRESSURE PUMP:
To overcome the Natural Osmotic Pressure a reverse thrust of high pressure is required to separate the Ions from water.
Depending upon the projection, an initial feed pressure is determined.
A Vertical Multi-Stage Centrifugal Pump is used for this application.
3. REVERSE OSMOSIS SYSTEM:
Production of low dissolved solids content by reverse osmosis using state of the art TFC Membranes. The high dissolved are separated into two streams. Product stream – with
2-3% of the feed salt will be collected. The second stream ( Reject stream ) of 97-98% more concentrated salt will be collected. Based on the feed conditions and controlling parameters a recovery ratio can be worked out from 60-75%
4. MEMBRANES:
Membranes form the barrier for the ionic separation. This separates the water into two streams. A product stream with ionic impurities and a reject stream with high ionic impurities.The ratio of two streams depends upon the design and can be anywhere between 0.3 – 0.7. The membranes are sensitive to various types of fouling and scaling factors. Hence a proper pre-treatment is necessary. Polyamide thin composite membranes are used and is currently imported items.
5. RO SKID:
The skid supports the reverse osmosis pressure vessel, membrane, control panel, pressure gauges and etc., The skid mounted design helps in assembling of components at the shop floor easier and much faster.
An isometric AutoCAD design is developed for SKID Fabrication for better space utilization and plant aesthetics.
6. INSTRUMENTATION:
To check the quality and monitor continuously, Online Conductivity Meter will be provided at the RO permeate water.
7. DUAL MEDIA FILTER
This is a separate unit out of the RO Machine which safe guards the machine and gives a longer durability to the RO machine – the raw water is fed to this system so that the color, turbidity and suspended impurities are removed, to certain extent and then water passes to the micron filter in the RO Machine. Certain bacteria and virus are also in-activated due to the activated carbon in this chamber.


High Lights of Premium Model 500LPH RO plant
1. Compact Design -Size of the RO plant is only 2 feet X 2 feet X 5 feet which will have the complete system of interconnecting pipe lines , pump, membrane control panel etc.
2. Its just connect and start use concept. Latest design , Latest Equipments used, High Durability.
3. The reject water can be re-cycled as per desire to minimize the rejection ratio which is available only in imported models.
4. Online Volt meter, flow-meters , panel lights, push in starter switches etc helps the operation of the machine very easier.
5. Auto flush valve(auto timed) helps to double the life of the membrane.
6. Low pressure switch and tank full option can make the system fully automatic.

PIC- RO PLANT – 500 LPH – Premium Model




Offer
  • Our Charges for supply of Each RO Plant shall be Rs.1,98,700/-( Rupees One lakh ninety eight thousand and seven hundred only)
  • Erection and Commissioning of RO Plant shall be Free of Cost
  • Delivery is Free of Cost only with in Chennai, others all other extras
  • Taxes 5 % VAT


Sample Picture

Offer
  • Our Charges for supply of Each RO Plant shall be Rs.1,79,900/-( Rupees One lakh seventy nine thousand and nine hundred only)
  • Erection and Commissioning of RO Plant shall be Free of Cost
  • Delivery is Free of Cost only with in Chennai, others all other extras
  • Taxes 5 % VAT


Sample snap

Offer
  • Our Charges for supply of Each RO Plant shall be Rs.1,29,600/-( Rupees One lakh twenty nine thousand and six hundred only)
  • Erection and Commissioning of RO Plant shall be Free of Cost
  • Delivery is Free of Cost only with in Chennai
  • Taxes 5% VAT

250 LPH RO PLANT

SAME SPECS AS ABOVE FOR 500 LPH RO PLANT
  • IN PREMIUM QUALITY – RS. 30000/- LESS
  • IN STANDARD QUALITY – RS. 25000/- LESS
  • IN ECONOMY QUALITY – RS. 20000/- LESS

100 LPH RO PLANT

SPECIFICATIONS & BILL OF QUANTITIES
RO 100 Lph – 20” Floor Standing :
Housings : 20” 3 Blue
Low pressure cut off switch : 1 no
Filters : 5 Micron - GAC - 1 Micron
Pumps : 2 Nos. Hitech 300GPD 24V
Transformer : 2 Nos. 24V - 3 Amps
Membrane : 2 Nos. Hitec (70 mmX 300mm)
Membrane Housing : 2 Nos. White
Flow Restrictor : 3 Nos.
Flush Valve : Auto timer flush with Solenoid valve
Post carbon filter : 2 Nos.
Tubing : White
Glycerin filled Gauge 0-7bar : 1 No.
Frame : SS Frame for 20” Housing
Solenoid valve : 1 no.

PIC

Offer
  • Our Charges for supply of RO Plant shall be Rs.24,900/-( Rupees Twenty four thousand nine thousand Only)
  • Erection and Commissioning of RO Plant shall be Free of Cost within Chennai corporation limits.
  • Delivery free of cost within Chennai city limits
  • Taxes 5% vat

50 LPH RO PLANT

SPECIFICATIONS & BILL OF QUANTITIES
RO 50 Lph – 20” Floor Standing / Wall Mountable:
Housings : 20” 3 Blue
Filters : Micron filters – 3 nos
Pumps : 2 Nos. DY 24V
Transformer : 2 Nos. 24V
Membrane : 4 Nos. Vontron
Membrane Housing : 4 Nos. White
Flow Restrictor : 2 Nos. Imported
Flush Valve : 2 Nos. Imported
Post Filter : 2 Nos. Kemflo Carbon
Tubing : White
Packing : White
Frame : SS Frame for 20” Housing
PIC

Offer
  • Our Charges for supply of RO Plant shall be Rs.18,900/-( Rupees Eighteen thousand nine hundred Only)
  • Erection and Commissioning of RO Plant shall be Free of Cost
  • Free within Chennai Limits
  • Taxes 5% vat

N.B 1 : To Treat the water Accordingly and best results a Water Analysis Report from a authorized laboratory having NABL(National Accredition board for testing and calibration Laboratories) Certification is compulsory.
N.B 2 : FYI –We have worked IRCTC-Rail Neer Project at Palur in Procuring the required Materials, Erection and Commissioning of the whole plant, Also erected many 10000 & 5000+ LPH RO plants in and around Chennai city for Packaged Drinking water units.
N.B. 3 : The Above Quote is given in the basis water TDS is less than 1500ppm and it is free iron .If TDS is more than 1500ppm and if water is found with traces of Iron pls request for a separate quote.
N.B 4 : Chlorine Dosing System , UV Sterilizer, Ozone sterilizer, PH Stabilizer and others can be included if necessary at extra cost.

5000lph RO Plant


10000lph RO plant


Scope of Works
  • RO Plant Design with Detail Engineering, Fabrication, Supply, Erection Testing and Commissioning of plant
  • Inlet line to RO Plant minimum of 1 m from raw water tank and reject line of 1m For plant area and treated water
Exclusions
  • RO plant room and its Illumination
  • Equipment Foundations
  • Site Clearance and handing over to us
  • Raw water & Treated water collection tank
  • Incoming power and water to plant area (1 nos -16 Amps power point with trip switch, 1 no. – 5 Amps power point for dosing system)
  • Raw water pump
  • RO Reject discharge
  • Power and Water during work period
  • Service Engineer Food , Accommodation & Traveling Expenses(To & fro plus Local transfers) during the timing of Erection and Commissioning (Applicable for out station installations only)
  • Any general consumables during plant erection and commissioning.
  • All civil works.
  • Power distribution up to our system control panel.
  • All inter-connecting piping out of battery limit.
  • System un-loading , safe storage & Insurance.
  • Transfer of our materials to work point.
Terms of Payment
  • 90% advance against work Order
  • 10% against Erection and Commissioning .
  • All payment should be in favour of Ms.Venuscreatech solutions
Delivery Schedule
  • 2-3 Weeks from the date of confirm PO with Advance

© Water Sparks. All rights reserved | Design by VENUSCREATECHSOLUTIONS